PS BELVI

The waste water collected by the sewage system in Bečići is emptied into the shaft of the pumping station PS 04Belvi. PS Belvi is a facility with basic dimensions of 7.40 x 10.90 m and is built on two levels, underground and above ground, with a total gross area of ​​105.5 m2. In the above-ground part of the building there is a room with electrical equipment, and in the underground part there are a pumping station with a bottom elevation of 2.40 meters above sea level and a machine hall for housing the main mechanical equipment. Within the pumping station, 3+1 pumping units are installed, each with a power of 75 kW and a flow rate of 112.5 l/s. For the economic shredding of solid and destructive materials such as fabric, garbage, etc., as well as for the purpose of effective protection of pumps and system components from clogging, blocking and damage, a "macerator" (knife-crusher) was installed at the PS Belvi facility. Crusher model XRL 186-780 QD, manufactured by Vogelsang, has the following technical characteristics: maximum flow: 60 m3 /h opening dimensions: 435 x 780 mm. The waste water from the pumping station is pumped to the collection pumping station Budva through the pipeline 560x33.2 PE100.